Syntron Electricals Private Limited
(AN ISO 9001 : 2015 Company)

syntron controlgear

MICRO CONTROLLER based apfc 1143

SEND ENQUIRY
  • 4 Digit Digital Power Factor Meter for accurate measurement.
  • Built in Auto-Manual Control.
  • Calibrated P.F Setting & Dead Band Setting.
  • Auto detection of external wrong connections.
  • Fault indication for no load current or wrong wiring.
  • Special versions available for Thyristor Real Time Control.
  • Special Sequences on request (Factory Set - FIFO).
  • Built in Test Facility.
  • Sensitivity better than 1% (50mA).
  • Available in 2, 4, 6, 8, 10, 12, 14 & 16 stages.
  • Compact DIN Standard Flush Mounting.
  • Size : 144mm X 144mm X 100mm.

Micro controller based APFC 1170

SEND ENQUIRY
  • Most economical APFC Relay available in market.
  • No settings, no programming to make.
  • Sensitivity better then 1% (50ma).
  • Auto detection & indication of low load current & wrong wiring.
  • Built-in software timers for fast correction yet ensuring capacitorsafety.
  • Available in 2,4,6,8,10,12,14 & 16 stages.
  • Field proven design.
  • Compact DIN standard flush mounting.
  • Reliable COSROBOT technology.
  • Choice of sequence FIFO-BINARY (FACTORY SET).
  • SIZE : 144mm X 144mm X 100mm.

MICROCONTROLLER Based apfc 1188

SEND ENQUIRY
  • Robust design
  • 4 Digit Red Bright FND Display
  • Programmable on site CT ratio
  • Programmable on site PT ratio
  • Password Protection
  • LED Indication for Healthy Phase
  • 32 Bit, 100 Pin, Processor
  • SMT Technology
  • Various choice of bright LED / LED STN display
  • 2-4 keys for programming input
  • Higher Class of Accuracy
  • 2 Quadrant to 4 Quadrant
  • Provision of RTC based Load Survey
  • RS485 interface
  • MODBUS Protocol

MICRO CONTROLLER BASED apfc 1179

SEND ENQUIRY
  • 4 Digit Digital Power Factor Meter for accurate measurement.
  • Built in Auto-Manual Control.
  • Calibrated P.F Setting & Dead Band Setting.
  • Auto detection of external wrong connections.
  • Fault indication for no load current or wrong wiring.
  • Special versions available for Thyristor Real Time Control.
  • Special Sequences on request (Factory Set - FIFO).
  • Built in Test Facility.
  • Sensitivity better than 1% (50mA).
  • Available in 2, 4, 6, 8, 10, 12, 14 & 16 stages.
  • Compact DIN Standard Flush Mounting.
  • Size : 144mm X 144mm X 100mm.

Micro controller Based (3-C.T) apfc 2205

SEND ENQUIRY
  • Programmable upto 12 stages.
  • Alarm Output for Insufficent Compensation,Over THD & Over Voltage.
  • Three Phase Four Wire Triple Element Measurements (3 C.T) for balanced/unbalanced loads.
  • Bright 4 Digit 14.2mm LED Display.
  • Programmable Parameters.
  • Built-in Power Analyser : Displays V, A, Hz,COS j,KW,Kvar,THD, KVA of each phase & Total.
  • Available for Thyristor Switching Systems also.
  • Sensitivity better than 1% (50mA).
  • Standard DIN Flush Mounting.
  • Size : 144mm X 144mm X 100mm

THREE PHASE DIGITAL VOLTMETER TYPE DMV-3

SEND ENQUIRY
  • Bright LED Seven segment 14.2mm display.
  • Microcontroller based.
  • Measure phase-neutral voltage, also phase to phase.
  • Auto scroll facility available.
  • Accuracy class : 1.0
  • Comact standard DIN flush mounting.
  • SIZE : 96mm X 96mm X 75mm.

SINGLE PHASE DIGITAL VOLT METER TYPE DMV-1

SEND ENQUIRY
  • Bright LED seven segment 14.2mm display.
  • Available range : 0-600volt.
  • Also available for PT operated HT applications.
  • Accuracy class :1.0
  • Comact standard DIN flush mounting.
  • SIZE : 96mm X 96mm X 65mm also available in
  • SIZE : 48mm X 96mm X 110mm.

THREE PHASE DIGITAL AMMETER TYPE DMA-3

SEND ENQUIRY
  • Bright LED seven segment 14.2mm display.
  • Microcontroller based.
  • Auto scroll facility available.
  • Available range : 30.0/5A to 1500/5A.
  • C.T Ratio selectable by DIP switch at rear.
  • Accuracy class : 1.0.
  • Comact standard DIN flush mounting.
  • SIZE : 96mm X 96mm X 75mm.

SINGLE PHASE DIGITAL AMMETER TYPE DMA-1

SEND ENQUIRY
  • Bright LED seven segment 14.2mm display.
  • Available range : 100-1600/5A or 10.0 to 160.0/A.
  • C.T Ratio selectable by DIP switch at rear.
  • Accuracy class : 1.0.
  • Comact standard DIN flush mounting.
  • SIZE : 96mm X 96mm X 75mm.
  • SIZE : 48mm X 96mm X 110mm.

MULTYIFUNCTION METER TYPE-3060

SEND ENQUIRY
  • True RMS 4 digit measurement of voltage & current.
  • Four digit frequency measurement.
  • Conveniently accessed DIP switch at rear for C.T selection from 30.0/5A to 1500/5A.
  • Flicker free bright 14.2mm LED display.
  • Auto scroll facility.
  • Accuracy class : 1.0
  • Comact standard DIN flush mounting.
  • SIZE : 96mm X 96mm X 85mm.

About Syntron

SYNTRON ELECTRICALS PVT. LTD. was established in the year 1982 at Mumbai as a small scale industry, manufacturing Automatic Power Factor Control Relay, Digital meters and Panel Accessories, now the company has shifted to Delhi in order to capture the entire world.

 

Why Syntron

- Here you have the freedom to learn, apply, and grow
- You challenge convention, you change to improve, and we appreciate and reward you.
- Here your growth story will power our corporate success seamlessly

Useful Links

Get in Touch

Syntron Electricals Pvt. Ltd.

Bhagirath Palace, Chandni Chowk Delhi 110006

Phone no: 011-23877176 / 011-23877217

Email : info@syntron.org

copyright © 2017 Syntron Electricals Pvt. Ltd.   All right reserved    Website Design & devloped by GTM Infotech